Vango Replacement Airspeed Tube

Replacement Tube Size Airspeed Tube 405 x 13cm - AT004 AirSpeed Tube 595 x 13cm - AT009 AirSpeed Tube 600 x 10cm - AT010 Airspeed Tube 655 x 10cm - AT012 AirSpeed Tube 685 x 10cm - AT013 AirSpeed Tube 685 x 13cm - AT014 Airspeed Tube 708 x 10cm - AT015 Airspeed Tube 615 x 13cm - AT011 AirSpeed Tube 735 x 10cm - AT022 Airspeed Tube 735 x 13cm - AT018 Airspeed Tube 430 x 10cm - AT005 Airspeed Tube 555 x 10cm - AT008 Airspeed Tube 465 x 10cm - AT007 Airspeed Tube 495 x 13cm - AT006 Airspeed Tube 610 X 10/ 13 si Pro - AT326 Airspeed Tube 712 X 13cm Cross AT016 Airspeed Tube 785 X 13cm Front AT024 AirSpeed Tube PRE-2015 410 X 10CM - AT027
Qty:
Details

In the unlikely event that you may need to replace your AirBeam® tube, simply remove the old tube from the beam sleeve and replace with the new tube. Once the beam sleeve is zipped and secured, replace into the tent/awning sleeve and inflate. The AirSpeed tubes are quick and easy to change, so that you can carry on with your camping holiday as soon as possible! Visit campingspares.co.uk to see what tube you require for your tent/awning.

Fully deflate the AirBeam® tube to be replaced

Unzip the outer sleeve of the AirBeam® on the inside of the flysheet

Remove the AirBeam® from the internal zipped sleeve.

Cut the cable tie that holds the zips together (ties stop accidental opening)

Remove the inner tube from its protective outer

Place the new inner tube inside the protective outer. Align valve with the opening in the protective outer. Zip closed, taking care not to catch the inner tube. Reconnect the zips together with the cable tie provided, to prevent accidental opening when the AirBeam® is inflated

Re-inflate AirBeam® to the correct PSI

Re-insert the AirBeam® into the zipped sleeve on the tent flysheet